Nowadays, welding is used in many places. First of all, we need to know what can be welded and what thickness is suitable for welding. So what should we pay attention to when using plastic welding? What are the important factors to ensure the welding quality? First of all, the pressure and time of welding should be considered.

1、壓力。

1. Pressure.

對焊接表面施加適當的壓力，焊接材料將由彈性向塑性過渡，還可以促進了分子相互擴散并擠去焊縫中的殘余空氣，從而增加焊接面密封性能。如果在焊接時未往下壓，或者焊條拉伸太大，往往會引起開裂。

Applying proper pressure on the welding surface, the welding material will be transformed from elastic to plastic, which can also promote the mutual diffusion of molecules and squeeze out the residual air in the weld, thus increasing the sealing performance of the welding surface. If the welding is not pressed down, or the electrode is stretched too much, it will often cause cracking.

2、時間

2. Time

要有適當的熱熔時間和足夠的冷卻時間。當熱功率一定時，時間不夠會出現虛焊，時間過長會造成焊件變形，熔渣溢出，有時還會在非焊接部位出現熱斑（變色）。一定保證焊接面吸收足夠的熱量達到充分熔融的狀態，才能保證分子間充分擴散熔合，同時一定保證足夠的冷卻時間使焊縫達到足夠的強度。

There should be proper hot melting time and enough cooling time. When the thermal power is fixed, insufficient time will lead to false welding, too long time will cause deformation of weldment, slag overflow, and sometimes hot spot (discoloration) will appear in the non welding parts. It is necessary to ensure that the welding surface absorbs enough heat to reach the state of full melting, so as to ensure the full diffusion and fusion between molecules, and at the same time, it is necessary to ensure that the cooling time is enough to make the weld achieve sufficient strength.

3、熔融量

3. Melting amount

熱熔時間和熱功率協調調整才會得到恰當的熔融量，保證足夠的分子間融合，虛焊的現象。除了焊接設備和操作人員技能水平外，來之于塑料內部或外部的各種因素，對焊接質量有一定的影響，應當引起重視。

Only when the melting time and heat power are adjusted coordinately, the appropriate melting amount can be obtained, enough intermolecular fusion can be ensured, and the phenomenon of false welding can be eliminated. In addition to the skill level of welding equipment and operators, various factors from the inside or outside of plastics have certain influence on the welding quality, which should be paid attention to.

以上就是山東數控焊接設備廠家為大家所講解的內容，希望可以幫助到大家，更多的精彩內容希望可以關注：http://m.xihagames.com會有精彩內容呈現給大家。

The above is what Shandong numerical control welding equipment manufacturer explained to you. I hope it can help you. I hope you can pay attention to more wonderful contents http://m.xihagames.com There will be wonderful content for you.