As an automatic welding equipment, occasional failure is normal. Now let's introduce the common faults of pipe automatic welding machine? We hope that through our sharing, we can help you have more experience and understanding of the use of equipment!

管管自動焊機不易起弧1.如果導電噴嘴燒壞，更換導電噴嘴

Pipe automatic welding machine is not easy to arc 1 If the conductive nozzle burns out, replace the conductive nozzle

2.如果焊絲的選擇與實際情況不一致，則選擇合適的焊絲檔位

2. If the selection of welding wire is inconsistent with the actual situation, select the appropriate welding wire gear

3.應根據手冊中的規范選擇不當的焊接規范

3. Improper welding specifications shall be selected according to the specifications in the manual

4.如果焊絲伸出長度不合適，調整焊絲伸出長度啟動后，送絲緩慢，無法正常焊接

4. If the extension length of the welding wire is not appropriate, adjust the extension length of the welding wire. After starting, the wire feeding is slow and normal welding cannot be carried out

1.焊接電源故障見管道自動焊機說明書

1. For welding power failure, see the manual of pipeline automatic welding machine

2.如果二次線接觸不良，檢查或通知維修或制造商工件不旋轉

2. If the secondary line is in poor contact, check or notify the maintenance or manufacturer that the workpiece does not rotate

1.驅動電機斷電，保險絲熔斷；檢查驅動電機的電源

1. The drive motor is powered off and the fuse is blown; Check the power supply of the drive motor

2.變頻驅動保護；請參閱變頻器的說明那么以上就是我們管管自動焊機廠家為大家帶來的全部內容解讀了，希望只要在使用中注意這些細節，那么我們的工作就會有很好的運行效率！

2. Variable frequency drive protection; Please refer to the description of the frequency converter. Then the above is the interpretation of all the contents brought by our pipe automatic welding machine manufacturer. I hope that as long as we pay attention to these details in use, our work will have good operation efficiency!